Versatile 12V/24V DC jump start pack suitable for starting medium sized 24V commercial engines and all 12V cars/vans. The pack is designed for daily use within the bus and truck industries. The small footprint makes the Tower Pack ideal for service/breakdown vans where space can be limited.
The Tower Pack is designed primarily for heavy engine starting. The pack which is a 12V/24V dual voltage version has increased battery capacity, which is ideal for use within the bus, truck and plant industries for maintenance operations such as fuel bleeding, oil pressure build-up, tail-lift cycling as well as multi engine starting.
The exceptionally tough polyethylene case is shatterproof and is ideal for use in the most demanding of commercial environments. The high ‘waistline’ enables the pack to be operated in snow or flooded sites up to 300mm, without the risk of water ingress.
The unique design and small overall footprint makes the pack ideal for service vans where space can be limited. The Tower Pack shares many of the safety features associated with Powervamp’s premium range of jump starters such as reverse polarity audible warning and voltage spike suppression circuitry for ECU protection. The pack also has a 750A fused output to protect from short circuit or excessive cranking.
The standard 2m, 50mm2 highly flexible output cables allow the operator to safely connect to a flat battery within the engine bay whilst the pack remains on the floor. The cables terminate with fully cast 1000A braided croc clips, ensuring an equal power delivery with minimal volts loss. The cables are detachable to allow for easy storage or replacement.
The Tower Pack is supplied with a 10A external charger and detachable 240V AC power cable. Optional accessories include bus plug (cowbell) lead sets, a powerful 24V inspection lamp and an ‘on board charge kit’ (OBCK) to allow the pack to be charged via a 12V vehicle cigarette/auxiliary socket.
Croc Lead Set
UK Mains Lead
10 Amp External Charger
Cowbell/Bus Plug Lead
On-board Charge Kit
Tower Pack Trolley
Typical power plant*
Tower Pack 12V/24V | |
Peak amps | 2400 |
Nominal voltage | 12V / 24V DC |
Standing voltage | 12.8V / 25.6V DC |
Amp/hour capacity | 26 Ah @ 10hr rate (20°C) |
Fuse rating | 750A |
Operating temp | -40°C to +45°C (-40°F to 114°F) |
Case | Moulded impact resistant polyethylene |
Automotive cable | 2m (6ft) lead set with 1000A croc clips |
Charger | 12V 10A 100-230V AC / 50-60Hz external charger |
Dimensions | H 570mm (22in), L 180mm (7in), W 158mm (6in) |
Weight | 21kg (55lb) |
If you would like to add optional extras to your quote, please select from the boxes below before clicking the 'Add to Quote' button.
Select any optional extras you would like to add to the quote: